LOT-0001Non-sterile, 12-ply absorbent cotton gauze compress. Absorption capacity โฅ 10.5 g/g and absorption time โค 11 seconds. A biocompatibility report for the filament composition in accordance with FDA requirements shall be provided, or the product shall comply with DIN EN 14079.
LOT-0002Sterile insulin syringe with needle (0.33G), 100 IU, graduated.
LOT-0003Two-piece sterile syringe without needle, graduated.
LOT-0004Two-piece sterile syringe without needle, graduated.
LOT-0005Two-piece sterile syringe without needle, graduated.
LOT-0006Two-piece sterile syringe without needle, graduated.
LOT-0007Three-piece sterile syringe without needle, graduated, with a catheter tip (wide nozzle), featuring an extension of 4โ5 cm (for irrigation/flushing).
LOT-0008Adhesive tape made of 100% non-woven polyester, coated with a transparent synthetic adhesive with an adhesive strength of 13 ยฑ 4 N/25 mm, and provided with corrugated silicone-coated release paper for easy removal.
LOT-0009Sterile intravenous cannula with catheter and injection port, Luer Lock connection, fixation wings, and side port with cap.
LOT-0010Sterile intravenous cannula with catheter and injection port, Luer Lock connection, fixation wings, and side port with cap.
LOT-0011Sterile arterial cannula with catheter and injection port, fixation wings, and capped port.
LOT-0012Sterile PET vacuum blood collection tubes for serum, with a fixed vacuum, clot activator, no additives, and a cap with a plastic outer part and rubber inner stopper that is easily pierced by a needle.
LOT-0013Sterile PET vacuum blood collection tubes for hematology (CBC), with a fixed vacuum drawing 3 mL ยฑ 5%, internally coated with dry K2EDTA, and a cap with a plastic outer part and rubber inner stopper that is easily pierced by a needle.
LOT-0014Sterile PET vacuum blood collection tubes for hemostasis testing, containing 3.2% sodium citrate, with a fixed vacuum draw of 2.7 mL ยฑ 5% blood, and a cap consisting of a plastic outer cover and a rubber inner stopper that is easily pierced by a needle.
LOT-0015Sterile single-use needle for vacuum blood collection tubes, with a true flashback chamber allowing visualization of venous entry.
LOT-0016MINIVEN Vacutainerยฎ or equivalent, with fixation wings.
LOT-0018Blood Transfusion Set with Filter
LOT-0019Sterile single-use infusion set for gravity-fed precision infusion, with a 15 ฮผm filter and integrated dial flow regulator with a 0โ250 mL/h graduated scale, pressure-resistant up to 50 kPa, with an additional clamp for temporary interruption of infusion without altering the preset flow rate, made of polyethylene/polypropylene/polyvinyl chloride (PE/PP/PVC), length โฅ210 cm, Luer Lock connector, la
Sterile single-use infusion set for gravity-fed precision infusion, with a 15 ฮผm filter and integrated dial flow regulator with a 0โ250 mL/h graduated scale, pressure-resistant up to 50 kPa, with an additional clamp for temporary interruption of infusion without altering the preset flow rate, made of polyethylene/polypropylene/polyvinyl chloride (PE/PP/PVC), length โฅ210 cm, Luer Lock connector, latex-free.
LOT-0020Standard infusion pump set with silicone pump segment, bacterial filter and particle filter preventing the passage of larger particles, transparent drip chamber with integrated ring compatible with infusion pump drop sensor, roller clamp, compatible with B. Braun infusion pumps used at the clinic or equivalent.
LOT-0021Three-way stopcock (3-way connector), compatible with the B. Braun systems used at the Clinic, or equivalent.
LOT-0022Extension line compatible with syringe pumps (B. Braun devices are used at the Clinic) or equivalent Perfusorยฎ Space, made of PVC or polyethylene.
LOT-00233-part graduated Luer Lock syringe for use with syringe pumps (B. Braun syringe pumps used at the clinic) or equivalent, compatible with Perfusorยฎ FM and Space models, latex-free, made of biocompatible synthetic material, with a polypropylene plunger ensuring leak-free performance under pressure, supplied with a filter needle for aspiration and particle prevention.
LOT-0024Absorbent cotton wool โ 100% cotton.
LOT-0025Sterile powdered surgical gloves.
LOT-0026Sterile powdered surgical gloves.
LOT-0027Sterile powdered surgical gloves.
LOT-0028Sterile powdered surgical gloves.
LOT-0029Sterile powdered surgical gloves.
LOT-0030Nitrile examination gloves for single use, with chlorinated and polymer-coated inner surface. Compliant with EN 455 standard or equivalent. Width 110 mm ยฑ 5%, length โค 250 mm, tensile force at break โค 6 N, AQL โค 1.5, powder-free (<2 mg).
LOT-0031Nitrile examination gloves for single use, with chlorinated and polymer-coated inner surface. Compliant with EN 455 standard or equivalent. Width 110 mm ยฑ 5%, length โค 250 mm, tensile force at break โค 6 N, AQL โค 1.5, powder-free (<2 mg).
LOT-0032Sterile PVC endotracheal tube (transparent plastic) with cuff, without radiopaque line.
LOT-0033Sterile PVC endotracheal tube (transparent plastic) with cuff, without radiopaque line.
LOT-0034Sterile PVC endotracheal tube (transparent plastic) with cuff, without radiopaque line.
LOT-0035Sterile PVC endotracheal tube (transparent plastic) with cuff, without radiopaque line.
LOT-0036Second-generation disposable supraglottic airway device. The cuff is made of a gel-type material (SEBS) and conforms fully to the anatomy of the peri-laryngeal space, without an inflatable cuff. The proximal airway tube shall incorporate a standard 15 mm connector. Patient weight range, device size, and bite-depth indicator shall be clearly marked and visible when the device is in situ. The device
Second-generation disposable supraglottic airway device. The cuff is made of a gel-type material (SEBS) and conforms fully to the anatomy of the peri-laryngeal space, without an inflatable cuff. The proximal airway tube shall incorporate a standard 15 mm connector. Patient weight range, device size, and bite-depth indicator shall be clearly marked and visible when the device is in situ. The device shall be colour-coded according to size.
LOT-0037Second-generation disposable supraglottic airway device. The cuff is made of a gel-type material (SEBS) and conforms fully to the anatomy of the peri-laryngeal space, without an inflatable cuff. The proximal airway tube shall incorporate a standard 15 mm connector. Patient weight range, device size, and bite-depth indicator shall be clearly marked and visible when the device is in situ. The device
Second-generation disposable supraglottic airway device. The cuff is made of a gel-type material (SEBS) and conforms fully to the anatomy of the peri-laryngeal space, without an inflatable cuff. The proximal airway tube shall incorporate a standard 15 mm connector. Patient weight range, device size, and bite-depth indicator shall be clearly marked and visible when the device is in situ. The device shall be colour-coded according to size.
LOT-0039Sterile single-use hypodermic needle, manufactured from high-quality chromium/nickel steel, 0.8 mm ร 38โ40 mm.
LOT-0040Sterile single-use hypodermic needle, manufactured from high-quality chromium/nickel steel, 0.45 mm ร 14โ16 mm.
LOT-0041Transparent PVC urine collection bag, graduated in 100 mL increments, with non-return valve, drainage outlet, and sliding clamp closure.
LOT-0042Reusable enema set, consisting of an irrigator, cannula, and extension tubing.
LOT-0043Two-way Foley catheter โ 100% silicone.
LOT-0044Two-way Foley catheter โ 100% silicone.
LOT-0045Two-way Foley catheter โ 100% silicone.
LOT-0046Two-way Foley catheter โ latex.
LOT-0047Two-way Foley catheter โ latex.
LOT-0048Two-way Foley catheter โ latex.
LOT-0049Blood glucose test strips (rapid glycemia testing strips).
LOT-0050Woven long-stretch compression bandage, 95% cotton.
LOT-0051Oronasal oxygen mask set, sterile, individually packed, with adjustable nose clip and connecting tubing for adults, minimum tube length 2 m.
LOT-0052Nasal oxygen set, sterile, individually packed, including connection tubing and adult nasal cannula, tubing length min. 1.5 m โ max. 3 m.
LOT-0053Nasogastric tube.
LOT-0054Nasogastric tube.
LOT-0055Nasogastric tube.
LOT-0056Single-use two-piece sterile syringe, latex-free, Luer Lock, without needle.
LOT-0057Insulin needle 31G, 0.25 ร 6 mm.
LOT-0058PVC endotracheal suction catheter, sterile, individually packed.
LOT-0059Surgical scalpel.
LOT-0060Surgical scalpel.
LOT-0061Adult nebulizer mask set (with nebulizer chamber), single-use, sterile, individually packed.
LOT-0062Calico bandage roll.
LOT-0063Dressing for fixation of needles and intravenous cannulas, made of elastic non-woven material with rounded edges and adhesive strength of at least 13 N/20 mm, featuring a movable absorbent pad measuring 3 ร 1.5 cm and an insertion-site pad measuring 2 ร 2 cm.
LOT-0064Esmarch tourniquet โ elastic tourniquet with ergonomic design and a special locking mechanism enabling a dual tightening system and two release modes (instant or gradual release), made of rubber-cotton material, minimum dimensions 2.5 cm ร 40 cm.
LOT-0065PVC three-piece syringe of 100cc. without needle, sterile, with beak for single use
LOT-0066Vacuum tube needle holder
LOT-0067Needles for 0.9 x40mm (with a tolerance of +/-5% in dimensions) sterile for single use
LOT-0068Needles for 1.2 x40mm (with a tolerance of +/-5%) sterile for single use
LOT-0069Endobronchial aspiration catheters, made of medical plastic, 50cm long, 14Fr., (with a tolerance of +/-5%).
LOT-0070Reusable solution transfer attachment, sterile (with protruding needle for withdrawing solution from rigid containers) and leak-proof cap, with 0.45 ยตm bacterial filter and 0.5 ยตm particle filter, PVC-free and latex-free
Endobronchial aspiration catheters, made of medical plastic, 50cm long, 14Fr., (with a tolerance of +/-5%).
LOT-0071Accessory for transferring solutions between large containers and vials compatible with 6.3 mm rubber stopper and bag port or equivalent with a minimum flow diameter of 3 mm, PVC-free and latex-free
LOT-0072Sterile scalpels in individual packaging no. 10
LOT-0073Sterile scalpels in individual packaging no. 15
LOT-0074Sterile scalpels in individual packaging no. 23
LOT-0075Intravenous cannula with needle and stopper 18 G; sterile for single use
LOT-0076Intravenous cannula with needle and stopper 16 G; sterile for single use
LOT-0077Spare antibacterial filter compatible with RTM 3 manometer, to be packed in a plastic tube
LOT-0078Sterile needle for spinal anesthesia, diagnostic puncture, crystal prism for easier visualization, with Quincke type puncture tip, length 88mm, diameter 22 Fr (0.7mm) made of stainless steel.
LOT-0079Sterile needle for spinal anesthesia, diagnostic puncture, crystal prism for easier visualization, with Quincke type puncture tip, length 88mm, diameter 25 Fr (0.53mm) made of stainless steel.
LOT-0080Sterile needle for spinal anesthesia, diagnostic puncture, crystal prism for easier visualization, with Quincke type puncture tip, length 88mm, diameter 26 Fr (0.47mm) made of stainless steel.
LOT-0081Sterile needle for spinal anesthesia, diagnostic puncture, crystal prism for easier visualization, with Quincke type puncture tip, length 88mm, diameter 27 Fr (0.42mm) made of stainless steel.
LOT-0082Arterial femoral cannula with wire-reinforced shaft and multiple side holes. One-piece PVC introducer sheath with an elongated tapered tip allowing gradual dilation over a longer segment, also suitable for percutaneous cannula placement. Flexible, kink-resistant, thin-walled design enabling high flow rates. Equipped with a suturing ring. The cannula is terminated with a 3/8'' connector, featuring
Arterial femoral cannula with wire-reinforced shaft and multiple side holes. One-piece PVC introducer sheath with an elongated tapered tip allowing gradual dilation over a longer segment, also suitable for percutaneous cannula placement. Flexible, kink-resistant, thin-walled design enabling high flow rates. Equipped with a suturing ring. The cannula is terminated with a 3/8'' connector, featuring an air-evacuation port for possible air removal during cannula placement and a silicone cap.
LOT-0083Multi-port, non-kinking, femoral venous cannula, cannula body to be reinforced with wire. PVC introducer with depth markings. PVC introducer has an elongated taper to dilate a longer distance, which also serves for percutaneous placement of the cannula.
Multiple ports on the cannula optimizes drainage of the entire circulation with access to the IVC, atrium and SVC. To terminate with a 3/8 connec
Multi-port, non-kinking, femoral venous cannula, cannula body to be reinforced with wire. PVC introducer with depth markings. PVC introducer has an elongated taper to dilate a longer distance, which also serves for percutaneous placement of the cannula.
Multiple ports on the cannula optimizes drainage of the entire circulation with access to the IVC, atrium and SVC. To terminate with a 3/8 connector without a port. Can be with or without placement kit
LOT-0084Dual-lumen jugular catheter for long-term veno-venous extracorporeal membrane oxygenation (VV-ECMO). The dual-lumen design enables precise placement through a single cannulation site, provides venous drainage and blood reinfusion via the jugular vein, and supports optimized flow dynamics. Indicated for use in patients with acute respiratory failure requiring VV-ECMO support. The catheter is equipp
Dual-lumen jugular catheter for long-term veno-venous extracorporeal membrane oxygenation (VV-ECMO). The dual-lumen design enables precise placement through a single cannulation site, provides venous drainage and blood reinfusion via the jugular vein, and supports optimized flow dynamics. Indicated for use in patients with acute respiratory failure requiring VV-ECMO support. The catheter is equipped with radiopaque markers visible on X-ray imaging. One-piece PVC introducer sheath with an elongated tapered tip allowing gradual dilation over a longer segment, facilitating percutaneous and easier cannulation.
LOT-0085One-piece vascular access needle 21G, length 7cm, compatible with .018'' wire, with echogenic tip and without baseplate
LOT-0086One-piece vascular access needle 21G, length 4cm, compatible with .018'' wire, with echogenic tip and without baseplate
LOT-0087Sono Block II peripheral nerve block anaesthesia needle, echogenic, non-stimulating, single-shot. Echogenic bevel tip with Cornerstone reflector technology ensuring direct and indirect reflection of ultrasound waves even at high insertion angles. Nano-line coated surface, fixed injection port, depth markers for visual confirmation of insertion depth. Dimensions 22G ร 80 mm (3 1/5โ), sterile, colou
Sono Block II peripheral nerve block anaesthesia needle, echogenic, non-stimulating, single-shot. Echogenic bevel tip with Cornerstone reflector technology ensuring direct and indirect reflection of ultrasound waves even at high insertion angles. Nano-line coated surface, fixed injection port, depth markers for visual confirmation of insertion depth. Dimensions 22G ร 80 mm (3 1/5โ), sterile, colour-coded.
LOT-0088Specialized dual-lumen arterial cannula for selective cerebral perfusion, made of silicone. The main lumen is intended for arterial blood infusion via an extracorporeal circulation system (ECC). The second lumen is used for balloon inflation, enabling positioning and prevention of retrograde blood flow; the balloon is located at the distal end of the cannula. The cannula wall is reinforced with a
Specialized dual-lumen arterial cannula for selective cerebral perfusion, made of silicone. The main lumen is intended for arterial blood infusion via an extracorporeal circulation system (ECC). The second lumen is used for balloon inflation, enabling positioning and prevention of retrograde blood flow; the balloon is located at the distal end of the cannula. The cannula wall is reinforced with a flexible steel wire allowing intraoperative shaping as required and preventing kinking. The cannula features multiple proximal side holes for enhanced perfusion.
LOT-0089Sterile anesthesia-stimulating needle compatible with neurostimulator model STIMUPLEX and hyperechoic with X reflective design, starting from the tip and three coded segments short-short-long, for better visualization, tip inclination 30ยฐ, needle diameter 0.9 mm, length 100mm. 4892510-1 STIMUPLEX ULTRA 360 30 20GX100MM
LOT-0090Sterile anesthesia-stimulating needle compatible with neurostimulator model STIMUPLEX and hyperechoic with X reflective design, starting from the tip and three coded segments short-short-long, for better visualization, tip inclination 30ยฐ, needle diameter 0.7 mm, length 80 mm. 4892508-1 STIMUPLEX ULTRA 360 30 22GX80MM
LOT-0091Sterile surgical gloves made of powder-free natural rubber latex, anatomically shaped, with beaded cuff and curved fingers, inner synthetic polymer coating and micro-roughened surface texture. Single-wall thickness in the palm area 0.19โ0.23 mm. Length โฅ270 mm. AQL 0.65. Tensile strength โฅ12 N. Protein level <10 ยตg/g per glove (Lowry method), with testing performed by an independent laboratory to
Sterile surgical gloves made of powder-free natural rubber latex, anatomically shaped, with beaded cuff and curved fingers, inner synthetic polymer coating and micro-roughened surface texture. Single-wall thickness in the palm area 0.19โ0.23 mm. Length โฅ270 mm. AQL 0.65. Tensile strength โฅ12 N. Protein level <10 ยตg/g per glove (Lowry method), with testing performed by an independent laboratory to be provided. The manufacturer must comply with BSCI standards and submit a declaration confirming a successfully passed audit.
LOT-0092Transport agar-gel swabs with a plastic handle and cotton tip, resistant to sudden temperature changes, in a labeled PP tube with dimensions 12 x 155 mm, sterilized by irradiation, non-toxic and pyrogen free.
LOT-0093Self-adhesive antimicrobial incision foil with iodoform for the operating field, with dimensions 45cm x 66cm, incision surface dimensions 56cm x 45cm, sterilization with Gamma rays. (deviation in dimensions +-/5%).
LOT-0094ELECTRODES (self-adhesive pads) Adult electrode pads (pre-connected) compatible with SCHILLER DG5000/DG4000 defibrillator or equivalent, electrodes to be compatible without an adapter, and the packaging to have a diagram for electrode placement
LOT-0095Sono Block II peripheral nerve block anesthesia needle, echogenic non-stimulating single shot, echogenic facet tip, cornerstone reflectors technology that guarantees direct or indirect reflection of ultrasound waves even when placed at a high angle. nano line coated, non-removable injection tube, marked for visual confirmation of the depth of placement. Dimensions 21G x 100 mm (4"), sterile with c
Sono Block II peripheral nerve block anesthesia needle, echogenic non-stimulating single shot, echogenic facet tip, cornerstone reflectors technology that guarantees direct or indirect reflection of ultrasound waves even when placed at a high angle. nano line coated, non-removable injection tube, marked for visual confirmation of the depth of placement. Dimensions 21G x 100 mm (4"), sterile with color code.
LOT-0096Hydrocolloid dressing with calcium alginate, sterile, for single use, composed of: calcium alginate, carboxymethylcellulose, adhesive and plasticizer with waterproof film 20x20cm
LOT-0097Y-shaped endobronchial blocker intended for lung isolation and single-lung ventilation.
The set shall contain:
7 Fr endobronchial blocker, 75 cm long, bronchoscope adapter with cap, oxygen adapter and two protective caps.
Sterile, single-use.
Latex and DEHP free.
LOT-0098Epidural anaesthesia set consisting of:-Epidural needle with Tuohy tip design, 18G-Catheter made of polyamide, kink-resistant, 20G, length 100 cm, with depth markings for insertion depth control, atraumatic closed distal tip with three lateral eyes (side holes), radiopaque and MR-conditional markings-Catheter connector-Sterile single-use LOR (loss-of-resistance) syringe, 8 ml, for epidural space
Epidural anaesthesia set consisting of:
-Epidural needle with Tuohy tip design, 18G
-Catheter made of polyamide, kink-resistant, 20G, length 100 cm, with depth markings for insertion depth control, atraumatic closed distal tip with three lateral eyes (side holes), radiopaque and MR-conditional markings
-Catheter connector
-Sterile single-use LOR (loss-of-resistance) syringe, 8 ml, for epidural space identification
-Epidural filter with flat, rounded housing, yellow colour-coded for differentiation from IV filters, total area 4 cmยฒ, equipped with a 0.2 ยตm bacterial and particle filter, pressure-resistant up to 7 bar, residual volume 0.45 ml, free from PVC, DEHP, BPA and natural rubber latex